Compare Products
Hide
VS
Networks for indoor scenarios such as apartments, villas, and shops.
Model
Dòng
Tính năng nổi bật
High-speed Wireless Access for Better Experience
Up to 1024 QAM Data Rates
The RG-MA180-L adopts the dual-radio design and complies with the next-generation IEEE 802.11ax standard. It delivers a combined data rate of up to 1.774 Gbps when both radios are enabled, providing high-speed access experience.
High-Density Client Access with OFDMA
The AP features Orthogonal Frequency Division Multiple Access (OFDMA) in IEEE 802.11ax. OFDMA enables the AP to divide a WLAN channel into a plurality of narrower sub-channels, with each client occupying one or more sub-channels. The AP allows clients to receive and send packets concurrently through scheduling. This reduces contention for air interface resources and backoff, shortens network latency, and improves network efficiency.
In a high-density deployment and access environment, the average rate per client increases to up to four times that of an IEEE 802.11ac client.
Environmentally-Friendly Design and Lower Power Consumption
The RG-MA180-L incorporates various new power saving technologies, including the single-antenna standby technology, dynamic multiple-input and multiple-output (MIMO) technology, enhanced automatic power saving transmission technology, and packet-based power control technology. With these technologies as well as high-performance power design, the AP is energy-efficient while providing high-speed wireless access service.
Intelligent Identification
The AP can identify PCs and mobile clients, such as iOS and Android clients. When used with Ruijie network optimization system, it can implement visualized wireless network management based on wireless clients and one-click network optimization.
Intelligent Local Forwarding
The RG-MA180-L integrates intelligent local forwarding technology of Ruijie Networks and eliminates traffic bottleneck of access controllers (ACs). The data forwarding mode of the AP can be pre-configured through Ruijie ACs. The AP determines whether data needs to be forwarded by the AC or be sent to a wired network for data exchange based on the SSID or user VLAN.
The local forwarding technology enables the AP to forward delay-sensitive data that requires real-time high-performance transmission through a wired network. This technology can greatly reduce the traffic forwarding pressure of the AC to better adapt to high-throughput transmission on 802.11ax networks.
Abundant QoS Policies
RG-MA180-L provides abundant QoS policies. It supports bandwidth limiting based on the WLAN, APs, and clients, as well as Wi-Fi Multimedia (WMM) that defines priorities for different service data. Therefore, it implements immediate transmission of audio and video, and guarantees smooth multimedia services.
The multicast-to-unicast technology supported by the AP solves the problem of video freezing due to packet loss or long latency in Video on Demand (VoD) and other multicast applications on a wireless network. This enhances the experience in the use of multicast video services on wireless networks.
Comprehensive Security Protection and Ease of Use
Secure Client Access
The RG-MA180-L supports a wide range of client access authentication modes, including web authentication, IEEE 802.1X authentication, MAC Address Bypass (MAB) authentication, and local authentication. It also fully supports Ruijie Global Security Network (GSN) solution. Complying with the standard network access control standard, the AP strictly defines a set of network access control policies in terms of client access, authorization, host compliance check, network behavior monitoring, and network attack prevention. These access control policies guarantee high network security for authenticated clients.
Comprehensive Wireless Security Protection
When used with RG-SNC system and RG-WS series AC, the RG-MA180-L provides a set of wireless security protection features, including Wireless Intrusion Detection System (WIDS), radio interference tracking, rogue AP containment, anti-ARP spoofing, and DHCP protection, to build a secure and reliable wireless network.
Multiple Easy-to-Use Authentication Modes
With Ruijie's authentication system or multi-service ACs, the AP supports various efficient and convenient authentication modes such as MAB, SMS authentication, and QR code authentication.
When a client connects to a network through MAB authentication, you only need to enter the username and password upon first login. The username and password are no longer required when the client device is restarted and connected to the network.
When a guest accesses a wireless network through SMS-based authentication, an authentication page pops up. On the authentication page, the guest can register an account using the mobile number, and accesses the Internet using the username and password in the SM received.
QR code-based authentication is another convenient way for guests to access the Internet. After connecting to a wireless network, the guest will receive a QR code prompt. The guest can access the Internet after being authorized by the visited employee. Guest behaviors are associated with the visited employee to ensure high security.
Flexible Device Management
Eweb Management
With the AC web GUI, the RG-MA180-L enables O&M personnel to complete wireless configuration easily, and manage the wireless network uniformly. On the AC web GUI, O&M personnel can manage APs and connected clients, limit the client rates, and restrict network access behaviors of the connected clients. With the GUI, O&M personnel can plan, manage, and maintain wireless networks conveniently.
Association with the Network Management Software
The RG-MA180-L can work with RG-WIS. RG-WIS can manage all ACs and APs on a network, including device configuration backup and device status check. The RG-WIS provides a wireless heat map to show the wireless signal distribution of APs in real-world situations.
Parameter |
RG-MA180-L |
Dimensions (W x D x H) |
86 mm x 86 mm x 38 mm (3.39 in. x 3.39 in. x 1.5 in.) |
Weight |
≤ 0.3 kg (0.66 lbs.) |
Installation |
In-wall mount (86 mm junction box) |
Parameter |
RG-MA180-L |
Radio design |
Dual-radio Two wireless RF ports Four spatial streams Radio 1: 2.4 GHz, two spatial streams: 2x2 MU-MIMO Radio 2: 5 GHz, two spatial streams: 2x2 MU-MIMO |
Operating frequencies |
Radio1: 802.11b/g/n/ax: 2.400 GHz to 2.483 GHz Radio2: 802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.47 GHz to 5.725 GHz, 5.725 GHz to 5.850 GHz Note: The operating frequency is country-specific. |
Data rate |
Radio 1: 2.4 GHz, 574 Mbps Radio 2: 5 GHz, 1.2 Gbps Combined: 2.4 GHz + 5 GHz, 1.774 Gbps |
Antenna type |
Built-in omnidirectional antenna |
Max. transmit power |
20 dBm Note: The transmit power is limited by local regulatory requirements. |
Power increment |
Configurable in increments of 1 dBm |
Modulation |
DSSS: DBPSK (1 Mbps), DQPSK (2 Mbps), and CCK (5.5 and 11 Mbps) OFDM: BPSK (6 and 9 Mbps), QPSK (12 and 18 Mbps), 16-QAM (24 Mbps), and 64-QAM (48 and 54 Mbps) MIMO-OFDM: QPSK, 16-QAM, 64-QAM, 256-QAM, and 1024-QAM |
Receive sensitivity |
802.11a: –91 dBm (1 Mbps), –90 dBm (5 Mbps), –87 dBm (11 Mbps) 802.11b/g: –89 dBm (6 Mbps), –82 dBm (24 Mbps), –78 dBm (36 Mbps), –72 dBm (54 Mbps) 802.11n: –85 dBm (MCS 0), –67 dBm (MCS 7), –67 dBm (MCS 7) 802.11ac: VHT20: –85 dBm (MCS 0), –62 dBm (MCS 8) 802.11ac: VHT40: –82 dBm (MCS 0), –57 dBm (MCS 9) 802.11ac: VHT80: –79 dBm (MCS 0), –53 dBm (MCS 9) 802.11ax: HE80: –79 dBm (MCS 0), –53 dBm (MCS 9), –52 dBm (MCS 11) |
Parameter |
RG-MA180-L |
Fixed service port |
1 x 10/100/1000Base-T Ethernet port with auto-negotiation 1 x 10/100/1000Base-T Ethernet port, compliant with IEEE 802.3af/at (PoE/PoE+) standard 2 x pass-through ports |
Status LED |
1 x system status LED |
Button |
1 x reset button |
Parameter |
RG-MA180-L |
Input power supply |
PoE or PoE+ input: 44 V to 57 V/0.3 A. The power source equipment (PSE) complies with IEEE 802.3af/at standard. |
Max. power consumption |
≤ 8 W |
Parameter |
RG-MA180-L |
Temperature |
Operating temperature: –5°C to +45°C (23°F to 113°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At a height between 3000 m (9,842.52 ft.) and 5000 m (16,404.2 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F). |
Humidity |
Operating humidity: 5% RH to 95% RH (non-condensing) Storage humidity: 5% RH to 95% RH (non-condensing) |
Safety standards |
IEC 62368-1, EN 62368-1 |
EMC standards |
EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2 |
Software Specifications |
RG-MA180-L |
WLAN |
Recommended number of associated clients: 64 SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote Intelligent Perception Technology (RIPT) Intelligent client identification technology Intelligent load balancing based on client quantity or traffic Client limiting: SSID-based client limiting Radio-based client limiting Bandwidth limiting: Client/SSID/AP-based rate limiting |
Security |
PSK and Web authentication Data encryption: WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3, WEP (64/128-bit) WeChat-based Authentication QR code-based guest authentication SMS-based authentication MAB authentication Data frame filtering: allowlist, static blocklist, and dynamic blocklist Client isolation Rogue AP detection and containment Dynamic ACL delivery RADIUS CPU Protection Policy (CPP) Network Foundation Protection Policy (NFPP) |
Routing and switching |
IPv4 feature: static IPv4 address and DHCP-assigned IPv4 address Multicast-to-unicast conversion PPPoE Client IPsec VPN FTP ALG and DNS ALG |
Ordering Information |
||
Model |
Description |
Remarks |
RG-MA180-L |
The RG-MA180-L is a universal ultra-thin wall plate dual-radio 802.11ax wireless access point. It can be mounted on an 86 mm junction box. It supports up to four spatial streams and an access rate of up to 1.774 Gbps. It complies with IEEE 802.11a/b/g/n/ac/ax standards and adopts IEEE 802.3af-compliant power supply. |
Mandatory |
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Liên hệ
How can we help you?